Optimization and Verification of PVC Artificial Leather Office Seat Transport Packaging Based on Heterogeneous Component Isolation

LU Jin; GUO Qiong; ZHAO Huan; SONG Jie

doi:10.19554/j.cnki.1001-3563.2026.15.036

PDF(2195 KB)

Packaging Engineering ›› 2026, Vol. 47 ›› Issue (15) : 353-362. DOI: 10.19554/j.cnki.1001-3563.2026.15.036

Optimization and Verification of PVC Artificial Leather Office Seat Transport Packaging Based on Heterogeneous Component Isolation

LU Jin, GUO Qiong, ZHAO Huan, SONG Jie^*

Author information +

History +

Abstract

The work aims to propose a packaging optimization scheme based on isolation and cushioning strengthening of heterogeneous components to solve the problem that the P004 PVC artificial leather office seat of H company is prone to indentation damage during logistics transportation. The combined cushioning structure composed of metal five-star foot independent constraint box and EPE was designed. The vibration test and drop test of four heights were carried out by setting six test groups (control group, constraint box, 2 EPE, 5 EPE, 2 EPE/constraint box, 5 EPE/constraint box), and the indentation area and depth of PVC artificial leather surface were quantitatively analyzed. At the drop height of 900 mm, the protective effect of 5 EPE/constraint box group was the best. The indentation area of PVC artificial leather surface was 238.61 mm², and the depth was 1.32 mm, which was 81.1% and 87.5% lower than that of the original packaging, respectively. There was no indentation on the leather surface after 60 min random vibration test. The combined cushioning structure effectively reduces the dynamic impact between heterogeneous components, significantly improves the protection reliability of PVC artificial leather furniture in the logistics process, and provides a theoretical basis and engineering reference for the transport packaging design of special-shaped and multi-material PVC artificial leather furniture.

Key words

PVC artificial leather / office seat / constraint box / packaging test / combined cushioning structure

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LU Jin, GUO Qiong, ZHAO Huan, SONG Jie. Optimization and Verification of PVC Artificial Leather Office Seat Transport Packaging Based on Heterogeneous Component Isolation[J]. Packaging Engineering. 2026, 47(15): 353-362 https://doi.org/10.19554/j.cnki.1001-3563.2026.15.036

References

[1] 吴启超, 范新晖, 陈慧雪. 高耐磨PVC人造革的制备、改进及应用研究进展[J]. 塑料包装, 2024, 34 (02): 18-21+54.
WU Q C, FAN X H, CHEN H X. Progress in preparation, improvement and application of high wear-resistant PVC artificial leather[J]. Plastic Packaging, 2024, 34 (02): 18-21+54.
[2] 李彬, 熊芬, 胡玉洁, 等. 汽车座椅PVC革柔软度影响因素研究[J]. 皮革科学与工程, 2021, 31 (05): 25-27+38.
LI B, XIONG F, HU Y J, et al. Research on Influencing Factors of Flexibility of PVC Artificial Leather for Automobile Seat[J]. Leather Sci Eng, 2021, 31 (05): 25-27+38.
[3] 丁晓良, 王帅, 单志华. 现代汽车内饰材料研究[J]. 皮革科学与工程, 2017, 27(6): 36-39.
DING X L, WANG S, SHAN Z H.Research on Modern Automotive Interior Materials[J]. Leather Sci Eng, 2017, 27(6): 36-39.
[4] 白先浪, 张群利, 辛志强. 融合注意力机制和加权双向特征网络的皮革包装缺陷检测方法[J]. 包装工程, 2025, 46(17): 232-242.
BAI X L, ZHANG Q L, XIN Z Q.A leather packaging defect detection method integrating attention mechanism and weighted bidirectional feature network[J]. Packaging Engineering, 2025, 46(17): 232-242.
[5] 余意, 韩勇, 潘迪, 等. 基于有限元法儿童座椅包装件的跌落优化分析[J]. 包装工程, 2020, 41(23): 115-123.
YU Y, HAN Y, PAN D, et al.Drop Optimization Analysis of Child Seat Package Based on Finite Element Method[J]. Packaging Engineering, 2020, 41(23): 115-123.
[6] 刘嘉圆, 蔡静蕊, 陈艳萍. 板式家具床头柜的全纸运输包装设计[J].包装工程, 2017, 38(07): 110-114.
LIU J Y, CAI J X, CHEN Y P.All-paper transport packaging design for panel furniture bedside tables[J]. Packaging Engineering, 2017, 38(07): 110-114.
[7] 周佳梦, 顾颜婷, 沈忠民. 家具内包装结构创新设计探索[J]. 家具, 2019, 40(04): 55-59.
ZHOU J M, GU Y T, SHEN Z M.Explore Innovative Design of Furniture Interior Packaging Structure[J]. Furniture, 2019, 40(04): 55-59.
[8] 汪靖营, 李军. 金属家具包装问题优化——以机场等候椅为例[J]. 家具, 2022, 43(03): 42-45.
WANG J Y, LI J.Research on Packaging of Metal Furniture——Taking Airport Waiting Chair as an Example[J]. Furniture, 2022, 43(03): 42-45.
[9] 谢颖佳, 张藩, 孙建明, 等. 苹果缓冲包装结构设计及性能分析[J]. 包装工程, 2025, 46(13): 169-175.
XIE Y J, ZHANG F, SUN J M, et al.Structural Design and Performance Analysis of Apple Buffer Packaging[J]. Packaging Engineering, 2025, 46(13): 169-175.
[10] 赵艳东, 谢亚, 张哲源. 瓦楞纸板/淀粉基发泡塑料/EPE纸塑填充组合结构材料缓冲性能研究[J]. 包装工程, 2026, 47(1): 197-203.
ZHAO Y D, XIE Y, ZHANG Z Y.Buffering Performance of Corrugated Cardboard/Starch Based Foamed Plastic/EPE Paper Plastic Filled Composite Structural Material[J]. Packaging Engineering, 2026, 47(1): 197-203.
[11] 魏娜, 周云令, 陈志强, 等. 准静态压缩下“EPE/瓦楞纸板”缓冲系统能量吸收的研究[J]. 印刷与数字媒体技术研究, 2024, (5): 123-133.
WEI N, ZHOU Y L, CHEN Z Q, et al.Energy Absorption of “EPE/Corrugated Cardboard” Cushioning System under Quasi-Static Compression[J]. Printing and Digital Media Technology Study, 2024, (5): 123-133.
[12] 尹兴, 陈志强, 崔久刚, 等. 快递包装EPE/瓦楞纸板动态缓冲性能[J]. 包装工程, 2022, 43(01): 52-57.
YIN X, CHEN Z Q, CUI J G, et al.Dynamic Buffering Performance of EPE/Corrugated Board Used in Express Packaging[J]. Packaging Engineering, 2022, 43(01): 52-57.
[13] Jin D, Dominik E D, Kolarik II R V, et al. Modeling of con trolled thermo-mechanical processing of tubes for enhanced manufacturing and performance[J]. Acta Metallurgica Sinica, 2000, 13(2): 832-842.
[14] 苏英霞, 陈矗, 乔蒙. 新型皮革POE用于汽车内饰可行性分析-POE革、PVC革、PU革性能对比[J]. 塑料, 2025, 54 (05): 116-120+183.
SU Y X, CHEN J, QIAO M. Feasibility Analysis of Using New Leather POE for Automotive Interior-Performance Comparison of POE Leather, PVC leather,PU Leather[J]. Plastics, 2025, 54 (05): 116-120+183.
[15] 国家市场监督管理总局, 国家标准化管理委员会. 皮革制品通用技术规范: GB/T 38412-2019[S]. 北京: 中国标准出版社, 2020.
State Administration for Market Regulation, National Standardization Administration of China. Leather goods- General specification: GB/T 38412-2019[S]. Beijing: Standards Press of China, 2020.
[16] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 包装设计通用要求: GB/T 12123-2008[S]. 北京: 中国标准出版社, 2019.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, National Standardization Administration of China. General Requirements for designing of packages: GB/T 12123-2008[S]. Beijing: Standards Press of China, 2019.
[17] 余伟, 刘莲, 陶云杰.基于共词聚类的家具企业电子商务营销数据挖掘[J]. 电子商务, 2018(2): 31-32.
YU W, LIU L, TAO Y J.E-commerce marketing data mining of furniture enterprises based on co-word clustering[J]. Electronic Commerce, 2018(2): 31-32.
[18] 王瑛, 肖建平. 包装技术在家具物流中的应用[J]. 木材工业, 2005, (04): 42-44.
WANG Y, XIAO J P.The Application of Packaging Technology in Furniture Logistics[J]. China Wood Industry, 2005, (04): 42-44.
[19] 肖雯娟, 郝阳. 常用密度EPE的静态压缩缓冲特性试验研究[J]. 中国包装工业, 2015, (08): 116-120.
XIAO W J, HAO Y.Experimental study on static compression buffering characteristics of common density EPE. China Packaging Industry, 2015, (08): 116-120.
[20] 中华人民共和国工业和信息化部. 家具包装通用技术要求: QB/T 4465-2013[S]. 北京: 中国轻工业出版社, 2013.
Ministry of Industry and Information Technology of the People’s Republic of China, General technical Requirements for Furniture packaging: GB/T 4465-2013[S] GB/T 4465-2013[S]. Beijing: China Light Industry Publishing House, 2013.
[21] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 包装运输包装件随机振动试验方法: GB/T 4857.23-2003[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, National Standardization Administration of China. Packaging- Transport-Random vibration test method: GB/T 4857.23-2003[S]. Beijing: Standards Press of China, 2008.
[22] 章永年, 张任飞, 孙晔, 等. 局部按压对不同成熟度番茄机械损伤的影响[J]. 农业工程学报, 2021, 37(11): 292-298.
ZHANG Y N, ZHANG R F, SUN Y, et al.Effects of Local Compression on the Mechanical Damage of Tomato with Different Maturity[J]. Transactions of the Chinese Society of Agricultural Engineering, 2021, 37(11): 292-298.
[23] 孙德强, 宋雅玲, 王力, 等. 真空平板玻璃托盘集装包装系统设计与跌落测试验证[J]. 包装工程, 2024, 45(07): 274-280.
SUN D Q, SONG Y L, WANG L, et al.Design and Drop Tests of the Pallet Unit Load Packaging System for Vacuum Flat Glass Sheets[J].Packaging Engineering, 2024, 45(07): 274-280.
[24] 张立军. 皇冠梨采后冲击损坏影响因素研究及模型预测[J]. 包装工程, 2023, (15): 45-51.
ZHANG L J.Research on the Influencing Factors of Postharvest Impact Injury of Crown Pear and Model Prediction[J]. Packaging Engineering, 2023, (15): 45-51.
[25] 张皓佳, 陈满儒. 燃气灶无纸箱热收缩保护性包装结构设计与评价[J]. 包装工程, 2019, 40(03): 131-135.
ZHANG H J, CHEN M R.Structural Design and Evaluation of Box-free and Heat Shrinkable Protective Package for Gas Stoves[J]. Packaging Engineering, 2019, 40(03): 131-135.
[26] 葛任伟, 欧阳勇, 张怀宇, 等. 抗事故包装箱缓冲结构厚度计算方法研究[J]. 机械设计与制造, 2011, 2(12): 38-40.
GE R W, OU Y Y, ZHANG H Y, et al.Research of computing methods of thickness of buffering structure of accident resistant packing cases[J]. Machinery design & manufacture, 2011, 2(12): 38-40.
[27] 钟卫洲, 张则熊, 刘小刚, 等. 多层包装箱冲击缓冲效应数值分析[J]. 中国测试, 2018, 44(10): 184-188.
ZHONG W Z, ZHANG Z X, LIU X G, et al.Numerical analysis on impact cushion behavior of multi layer container[J]. China measurement & test, 2018, 44(10): 184-188.
[28] 刘平, 白永钢. 包装装备跌落撞击缓冲特性分析[J]. 装备环境工程, 2021, 18(05): 94-99.
LIU P, BAI Y G.The Cushion Performance Analysis of Packaging Equipment under Impact[J]. Equipment Environmental Engineering, 2021, 18(05): 94-99.
[29] MIAO H, ZUO D, ZHANG R.Effect of Surface Topography on Stress Distribution of Vacuum Plate Glass for Different Aluminum Alloy Braced Pillars[J]. Key Engineering Materials, 2019(407/408): 705-709.
[30] 薛洁, 李欢, 王香兰, 等. 不同包装运输对猕猴桃货架品质的影响[J]. 食品科学, 2022, 43(5): 185-193.
XUE J, LI H, WANG X L, et al.Effect of Different Packages during Transportation on Shelf-Life Quality of Kiwifruit[J]. Food Science, 2022, 43(5): 185-193.
[31] 李昭, 刘梦, 孙建明, 等. 真空玻璃包装箱设计及振动仿真分析[J]. 包装与食品机械, 2020, 38(6): 56-60.
LI Z, LIU M, SUN J M, et al.Design and Vibration Simulation Analysis of Vacuum Glass Packaging Box[J]. Packaging and Food Machinery, 2020, 38(6): 56-60.