Effect of Die-cutting Process Parameters on the Creasing Form of Hard Packaging Boxes

CHEN Jing; SUN Peng; ZHU Hongyan; CHEN Lin; YE Wujia; HAN Jingjing; KE Xianwen; LIU Xinhai

doi:10.19554/j.cnki.1001-3563.2025.11.027

PDF(1276 KB)

Packaging Engineering ›› 2025, Vol. 46 ›› Issue (11) : 250-256. DOI: 10.19554/j.cnki.1001-3563.2025.11.027

Automatic and Intelligent Technology

Effect of Die-cutting Process Parameters on the Creasing Form of Hard Packaging Boxes

CHEN Jing, SUN Peng, ZHU Hongyan, CHEN Lin, YE Wujia, HAN Jingjing, KE Xianwen, LIU Xinhai

Author information +

History +

Abstract

The quality of die-cutting creasing directly impacts the forming quality of hard packaging boxes. The work aims to carry out experiments to study the effect of die-cutting process parameters on the creasing quality of hard packaging boxes, to provide theory reference for the forming quality control of hard packaging boxes. Two kinds of transfer paper widely used in packaging label printing were adopted as experimental materials and the die-cutting creasing experiment was conducted with the creasing tester. The creasing form data were measured to analyze the effect of bottom die groove width and indentation steel wire width on the creasing depth and width. The creasing form data of different paper were different. The creasing width correlated with the bottom die groove width positively, while the creasing depth correlated with the bottom die groove width negatively. The width and depth of the horizontal creasing were bigger than that of the longitudinal creasing. The creasing width did not increase with the increase of the indentation steel wire width. The indentation steel wire width did not affect the creasing depth significantly. It can be concluded that the creasing form correlates with the paper type. It is necessary to define paper test standards and control batch variation of paper. The change of bottom die groove width affects the creasing width remarkably, while the indentation steel wire width has little effect on the creasing form. The creasing quality of the hard packaging box can be controlled or optimized by setting or adjusting die-cutting process parameter values such as bottom die groove width, indentation steel wire width, etc.

Key words

bottom die groove width / indentation steel wire width / creasing depth / creasing width

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

CHEN Jing, SUN Peng, ZHU Hongyan, CHEN Lin, YE Wujia, HAN Jingjing, KE Xianwen, LIU Xinhai. Effect of Die-cutting Process Parameters on the Creasing Form of Hard Packaging Boxes[J]. Packaging Engineering. 2025, 46(11): 250-256 https://doi.org/10.19554/j.cnki.1001-3563.2025.11.027

References

[1] 孟唯娟. 折叠纸盒的模切压痕设计[J]. 印刷世界, 2012(3): 24-26.
MENG W J.Die-Cutting Indentation Design of Folding Carton[J]. Print World, 2012(3): 24-26.
[2] 徐国民, 朱学金. 烟包小盒模切质量控制要领[J]. 印刷技术, 2015(4): 25-27.
XU G M, ZHU X J.Quality Control Essentials of Die-Cutting for Cigarette Packets and Small Boxes[J]. Printing Technology, 2015(4): 25-27.
[3] 崔嘉雯, 赵红, 杨青峰, 等. 白酒对裱盒型及模切压痕质量问题预报与排除[J]. 包装工程, 2022, 43(19): 250-254.
CUI J W, ZHAO H, YANG Q F, et al.Prediction and Elimination of Quality Problems in Type, Die Cutting and Indentation of Framed Packaging Box for Liquor[J]. Packaging Engineering, 2022, 43(19): 250-254.
[4] 余林飞. 改进模切压痕工序提高药包纸盒上机适应性[J]. 印刷技术, 2016(4): 19-22.
YU L F.Improving Die-Cutting Indentation Process to Improve the Adaptability of Cartridge for Medicine Pack[J]. Printing Technology, 2016(4): 19-22.
[5] 杨炳海. 模切双压痕线的改进方法[J]. 印刷技术, 2023(1): 33-34
YANG B H.Improvement Method of Die-cutting Double Indentation Line[J]. Printing Technology, 2023(1): 33-34.
[6] 李俊. 模切压痕工艺常见技术问题分析[J]. 科技创新与应用, 2017, 7(13): 136.
LI J.Analysis of Common Technical Problems in Die-cutting Indentation Process[J]. Technology Innovation and Application, 2017, 7(13): 136.
[7] 翟洪杰, 刘三国, 张帆. 浅析包装箱模切压痕注意事项[J]. 印刷质量与标准化, 2017(6): 28-29.
ZHAI H J, LIU S G, ZHANG F.Brief Analysis on Matters Needing Attention in Die-Cutting Indentation of Packaging Box[J]. Printing Quality & Standardization, 2017(6): 28-29.
[8] 巩坤, 田辰远, 张凯. 卡纸盒压痕工艺的规范生产[J]. 印刷工业, 2022, 17(6): 29-30.
GONG K, TIAN C Y, ZHANG K.Standardized Production of Carton Indentation Process[J]. Print China, 2022, 17(6): 29-30.
[9] NYGARDS M, BHATTACHARYA A, KRISHNAN S.Optimizing Shear Strength Profiles in Paperboard for Better Crease Formation[J]. Nordic Pulp & Paper Research Journal, 2014, 29(3): 510-520.
[10] MENTRASTI L, CANNELLA F, PUPILLI M, et al.Large Bending Behavior of Creased PAPERBOARD. I. Experimental Investigations[J]. International Journal of Solids and Structures, 2013, 50(20/21): 3089-3096.
[11] 国家市场监督管理总局, 国家标准化管理委员会. 纸、纸板和纸浆试样处理和试验的标准大气条件: GB/T 10739—2023[S]. 北京: 中国标准出版社, 2023.
State Administration for Market Regulation, National Standardization Administration. Paper, board and Pulps—Standard Atmosphere for Conditioning and Testing: GB/T 10739—2023[S]. Beijing: Standards Press of China, 2023.
[12] 国家质量监督检验检疫总局, 国家标准化管理委员会. 纸和纸板试样的采取及试样纵横向、正反面的测定: GB/T 450—2008[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of China, National Standardization Administration. Paper and Board—Sampling for testing and identification of machine and cross direction,wire side and felt side: GB/T 450-2008[S]. Beijing: Standards Press of China, 2008.
[13] 陈琳, 张凡, 胡素霞等. 折叠纸盒压痕形态与成型质量分析研究[J]. 包装工程, 44(15): 269-275.
CHEN L, ZHANG F, HU S X, et al.Analysis and Research on Indentation Shape and Forming Quality of Folding Carton[J]. Packaging Engineering, 44(15): 269-275.
[14] 胡开堂. 纸页的结构与性能[M]. 北京: 中国轻工业出版社, 2006: 1-20.
HU K T.Structure of Paper Sheets Its Properties[M]. Beijing: China Light Industry Press, 2006: 1-20.
[15] 周景辉. 纸张结构与印刷适性[M]. 北京: 中国轻工业出版社, 2013: 5-20.
ZHOU J H.Structure of Paper Sheet and Its Printability[M]. Beijing: China Light Industry Press, 2013: 5-20.