食品接触材料高分子材料中钡、钴、铜、铁、锂、锰和锌的迁移量测定

方邢有, 路东琪, 马 青, 周明辉, 郑朝辉

包装工程(技术栏目) ›› 2012 ›› Issue (19) : 127-129.

包装工程(技术栏目) ›› 2012 ›› Issue (19) : 127-129.

食品接触材料高分子材料中钡、钴、铜、铁、锂、锰和锌的迁移量测定

  • 方邢有1, 路东琪1, 马 青1, 郑朝辉1, 周明辉2
作者信息 +

Determination of Barium, Cobalt, Copper, Iron, Lithium, Manganese, and Zinc Migration Quantity in Food Contact Polymer

  • FANG Xing-you1, LU Dong-qi1, MA Qing1, ZHEN Chao-hui1, ZHOU Ming-hui2
Author information +
文章历史 +

摘要

采用电感耦等离子体原子发射光谱仪(ICP-AES),同时测定了食品接触材料高分子材料中钡、钴、铜、铁、锂、锰和锌的迁移量,并对ICP-AES法测定时分析线的选择和入射功率、泵速、载气压力的影响,以及基体和共存离子的干扰情况等进行了研究。研究表明,此方法简便快速,回收率为85.9%~108%,相对标准偏差为2.92%~6.78%。

Abstract

Migration quantity of Barium, Cobalt, Copper, Iron, Lithium, Manganese, and Zinc was determined by inductively coupled plasma atomic emission spectrometry. The influence of analysis line, incident power, pump speed, and carrier gas pressure of ICP-AES, and matrix ion interference and coexistence were studied. The results showed that the method is simple and rapid; recovery for the elements determined is from 85.9% to 108%; and RSDs are in the range of 2.92%~6.78%.

引用本文

导出引用
方邢有, 路东琪, 马 青, 周明辉, 郑朝辉. 食品接触材料高分子材料中钡、钴、铜、铁、锂、锰和锌的迁移量测定[J]. 包装工程(技术栏目). 2012(19): 127-129
FANG Xing-you, LU Dong-qi, MA Qing, ZHOU Ming-hui, ZHEN Chao-hui. Determination of Barium, Cobalt, Copper, Iron, Lithium, Manganese, and Zinc Migration Quantity in Food Contact Polymer[J]. Packaging Engineering. 2012(19): 127-129

Accesses

Citation

Detail

段落导航
相关文章

/