基于喷墨印刷的RFID标签天线性价比优化方法研究

沈丽燕, 钱军浩

包装工程(技术栏目) ›› 2012 ›› Issue (15) : 121-124.

包装工程(技术栏目) ›› 2012 ›› Issue (15) : 121-124.

基于喷墨印刷的RFID标签天线性价比优化方法研究

  • 沈丽燕, 钱军浩
作者信息 +

Cost-effective Optimization of RFID Tag Antenna by Ink-jet Printing

  • SHEN Li-yan, QIAN Jun-hao
Author information +
文章历史 +

摘要

以小型偶极子天线为研究对象,采用无选择和选择性2种不同的喷墨印刷方式印制,对比了2种印刷方式下天线的识别距离和油墨耗用量。实验证明,在表面电流密度较高处进行选择性印刷,以增加墨层厚度的方法,有利于降低喷墨印制无源超高频RFID标签天线的成本,性价比明显提高。

Abstract

Small dipole antennas printed by full printing and selective printing were studied. The read range and ink consumption under the two conditions were compared. The results showed that the method of selective printing on the area of higher surface current density to increase ink layer thickness is propitious to reduce the cost of passive UHF RFID tag antenna and to improve its cost-effectiveness.

引用本文

导出引用
沈丽燕, 钱军浩. 基于喷墨印刷的RFID标签天线性价比优化方法研究[J]. 包装工程(技术栏目). 2012(15): 121-124
SHEN Li-yan, QIAN Jun-hao. Cost-effective Optimization of RFID Tag Antenna by Ink-jet Printing[J]. Packaging Engineering. 2012(15): 121-124

Accesses

Citation

Detail

段落导航
相关文章

/