缓冲用多功能产品包装模拟器的设计及验证

温时宝; 周晓猛; 郭皓冰; 焦守泽; 于振; 张振秀

doi:10.19554/j.cnki.1001-3563.2026.05.033

PDF(3870 KB)

包装工程（技术栏目） ›› 2026, Vol. 47 ›› Issue (5) : 325-332. DOI: 10.19554/j.cnki.1001-3563.2026.05.033

国防装备

缓冲用多功能产品包装模拟器的设计及验证

温时宝^1,*, 周晓猛¹, 郭皓冰², 焦守泽¹, 于振¹, 张振秀¹

作者信息 +

Design and Verification of Multifunctional Product Packaging Simulators for Cushioning Purposes

WEN Shibao^1,*, ZHOU Xiaomeng¹, GUO Haobing², JIAO Shouze¹, YU Zhen¹, ZHANG Zhenxiu¹

Author information +

文章历史 +

摘要

目的本研究旨在设计一种多功能产品包装模拟器,进行运输包装实验和包装动力学研究,用于模拟含多个关键元件的产品跌落冲击响应特性以及评价缓冲材料性能,满足教学与科研需求。方法分析运输包装件测试的应用要求,提出将多功能产品包装模拟器分为主体结构和关键元件两部分组成的方案,并进行实际制作;采用发泡聚乙烯EPE材料作为缓冲衬垫,通过系列包装件跌落试验,考察多功能产品包装模拟器的应用效果以及缓冲材料对自由跌落冲击响应的影响。结果分别进行了多功能产品包装模拟器主体结构以及带关键元件的包装件自由跌落冲击试验,得到的冲击加速度-时间曲线和最大冲击加速度值与相关文献数据一致。结论多功能产品包装模拟器能够模拟含3个关键元件的产品在自由跌落冲击下的响应特性,实现了通过数据直接了解缓冲衬垫对产品跌落冲击保护效果的目的,同时便于通过实验进一步研究缓冲材料对包装件冲击跌落的影响规律。

Abstract

The work aims to design a multifunctional product packaging simulator for transportation packaging experiments and packaging dynamics research, to simulate the drop impact behavior of products with key components and evaluate the protective performance of cushioning materials, so as to meet the requirements of both academic teaching and scientific research. The application requirements for testing transportation packages were analyzed. A design scheme was proposed, dividing the multifunctional product packaging simulator into two parts: the main structure and the key components, followed by its physical fabrication. With Expanded Polyethylene (EPE) as the cushioning material, a series of package drop tests were conducted to investigate the application effectiveness of the simulator and the influence of the cushioning material on the free-fall impact response. Free-fall impact tests were performed separately on the simulator's main structure and on the complete packages containing the key components. The obtained impact acceleration-time curves and the maximum impact acceleration values were consistent with data from relevant literature. The multifunctional product packaging simulator can effectively simulate the response characteristics of products with three key components under free-fall impact. It achieves the objective of directly understanding the protective effect of cushioning against product drop impact through data analysis. Furthermore, it facilitates further experimental research into the influence patterns of cushioning materials on the impact response of packages during drops.

导出引用

温时宝, 周晓猛, 郭皓冰, 焦守泽, 于振, 张振秀. 缓冲用多功能产品包装模拟器的设计及验证[J]. 包装工程. 2026, 47(5): 325-332 https://doi.org/10.19554/j.cnki.1001-3563.2026.05.033

WEN Shibao, ZHOU Xiaomeng, GUO Haobing, JIAO Shouze, YU Zhen, ZHANG Zhenxiu. Design and Verification of Multifunctional Product Packaging Simulators for Cushioning Purposes[J]. Packaging Engineering. 2026, 47(5): 325-332 https://doi.org/10.19554/j.cnki.1001-3563.2026.05.033

中图分类号： TB485.3

参考文献

[1] 高德, 王军, 计宏伟, 等. “包装应用力学”课程知识体系探讨[J]. 中国印刷与包装研究, 2012(4): 39-42.
GAO D, WANG J, JI H W, et al.Discussion on the Knowledge System of Packaging Applied Mechanics Curriculum[J]. China Printing Materials Market, 2012(4): 39-42.
[2] 孙德强, 李志强, 陈满儒, 等. 缓冲包装材料力学课程设置探究[J]. 包装学报, 2015, 7(2): 91-96.
SUN D Q, LI Z Q, CHEN M R, et al.Course Setting of Mechanics of Cushioning Packaging Materials[J]. Packaging Journal, 2015, 7(2): 91-96.
[3] 宋海燕, 黄利强. 运输包装课程教学改革研究[J]. 湖南工业大学学报(社会科学版), 2009, 14(5): 126-127.
SONG H Y, HUANG L Q.Research on Teaching Reform of Transport Packaging Course[J]. Journal of Hunan University of Technology (Social Sciences Edition), 2009, 14(5): 126-127.
[4] 李琛, 温慧颖, 刘兵. “运输包装技术”课程教学改革与实践[J]. 森林工程, 2016, 32(1): 87-90.
LI C, WEN H Y, LIU B.Teaching Reform and Practice of the Course of “Transportation Packaging Technology”[J]. Forest Engineering, 2016, 32(1): 87-90.
[5] 姚进, 朱和平. 物流运输包装课程教学改革探讨[J]. 创新创业理论研究与实践, 2023, 6(22): 38-40.
YAO J, ZHU H P.Discussion on Teaching Reform of Logistics Transportation Packaging Course[J]. The Theory and Practice of Innovation and Entrepreneurship, 2023, 6(22): 38-40.
[6] 李立, 雷桥. 《运输包装》案例教学法的应用[J]. 教育教学论坛, 2015(3): 135-136.
LI L, LEI Q.Application of Case Teaching Method in Transport Packaging[J]. Education and Teaching Forum, 2015(3): 135-136.
[7] SUHIR E, BURKE R.Dynamic Response of a Rectangular Plate to a Shock Load, with Application to Portable Electronic Products[J]. IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, 1994, 17(3): 449-460.
[8] GONG M L, LIN C.Analysis of Vibration Transmission Path in Packaging System and Design of Teaching Experiment[J]. Shock and Vibration, 2024, 2024: 1-12.
[9] XIAO H Y, XU C Z, YUAN F C, et al.Impact Response Prediction Method of Packaging Systems with a Key Component Considering Different Excitations and Cushioning Materials[J]. Shock and Vibration, 2022, 2022: 1-11.
[10] 苏远, 汤伯森. 缓冲包装理论基础与应用[M]. 北京: 化学工业出版社, 2006: 18.
SU Y, TANG B S.Fundamental and Application of Cushioning Packaging[M]. Beijing: Chemical Industry Press, 2006: 18.
[11] 彭国勋. 缓冲包装动力学[M]. 长沙: 湖南大学出版社, 1989: 24.
PENG G X.Buffer Packaging Dynamics[M]. Changsha: Hunan University Press, 1989: 24.
[12] 陈家璇, 周卫中, 张美, 等. 高弹EPE泡沫两自由度连续冲击包装动力学响应研究[J]. 包装工程, 2024, 45(19): 318-324.
CHEN J X, ZHOU W Z, ZHANG M, et al.Dynamic Response of Two-Degree-of-Freedom Continuous Impact Packaging for High Elasticity EPE Foam[J]. Packaging Engineering, 2024, 45(19): 318-324.
[13] 邓培畅, 王志伟. 多个关键部件产品的破损边界[J]. 包装工程, 2023, 44(21): 46-53.
DENG P C, WANG Z W.Damage Boundary for Products with Multiple Critical Components[J]. Packaging Engineering, 2023, 44(21): 46-53.
[14] 段宁宁, 余立. 斜支承系统关键件的跌落破损评价[J]. 噪声与振动控制, 2019, 39(1): 186-191.
DUAN N N, YU L.Dropping Damage Evaluation for Critical Components of Tilted Support Systems[J]. Noise and Vibration Control, 2019, 39(1): 186-191.
[15] 霍银磊, 姬喜龙. 含悬臂梁式易损件及弹性约束的产品跌落冲击分析[J]. 振动与冲击, 2021, 40(21): 283-289.
HUO Y L, JI X L.Drop Shock Analysis of Products with Cantilever Beam Type Vulnerable Parts and Elastic Constraints[J]. Journal of Vibration and Shock, 2021, 40(21): 283-289.
[16] 郝蒙, 陈安军. 非线性系统带集中质量悬臂梁易损件跌落冲击特性[J]. 振动与冲击, 2015, 34(15): 162-167.
HAO M, CHEN A J.Dropping Shock Characteristics of a Cubic Nonlinear System with a Cantilever Beam Type Elastic Critical Component Attaching a Concentrated Tip Mass[J]. Journal of Vibration and Shock, 2015, 34(15): 162-167.
[17] 伍瑾, 卢富德, 王彪, 等. 易损件在连续跌落冲击载荷作用下的动力学响应[J]. 振动与冲击, 2023, 42(20): 275-279.
WU J, LU F D, WANG B, et al.Dynamic Response of Vulnerable Part under the Continuous Drop Impact Loads[J]. Journal of Vibration and Shock, 2023, 42(20): 275-279.
[18] 李辉, 陈安军. 悬挂系统易损件跌落破损评价[J]. 噪声与振动控制, 2018, 38(1): 85-89.
LI H, CHEN A J.Dropping Damage Evaluation of Vulnerable Components for Suspension Systems[J]. Noise and Vibration Control, 2018, 38(1): 85-89.
[19] 张炜, 薛飞, 卢富德, 等. 考虑易损件物品-EPE 缓冲系统冲击响应分析[J]. 振动与冲击, 2015, 34(9): 116-119.
ZHANG W, XUE F, LU F D, et al.Impact-Response Analysis of the System Composed of Critical Component and EPE Cushion[J]. Journal of Vibration and Shock, 2015, 34(9): 116-119.
[20] WANG Z W, JIANG J H.Evaluation of Product Dropping Damage Based on Key Component[J]. Packaging Technology and Science, 2010, 23(4): 227-238.
[21] WANG J, WANG Z W, LU L X, et al.Three-Dimensional Shock Spectrum of Critical Component for Nonlinear Packaging System[J]. Shock and Vibration, 2011, 18(3): 437-445.
[22] 秦伟, 李光. 三自由度半正定系统随机振动仿真与试验研究[J]. 包装工程, 2020, 41(7): 134-140.
QIN W, LI G.Random Vibration Simulation and Experimental Study of Three-Degree-of-Freedom Semi-Definite System[J]. Packaging Engineering, 2020, 41(7): 134-140.
[23] 姜久红, 王志伟. 考虑易损件的包装系统在半正弦波激励下的冲击响应[J]. 包装工程, 2007, 28(7): 4-5.
JIANG J H, WANG Z W.Study of the Shock Response of Packaging System under Half-Sine Excitation[J]. Packaging Engineering, 2007, 28(7): 4-5.
[24] IKEDA K, KAMIMORI K, KOBAYASHI I, et al.Basic Study on Mechanical Vibration Suppression System Using 2-Degree-of-Freedom Vibration Analysis[J]. Vibration, 2023, 6(2): 407-420.
[25] 温时宝, 郭晓红, 魏光. 一种缓冲材料振动传递性试验可调式质量块:中国, 201320302164.0[P].2013-10-16.
WEN S B, GUO X H, WEI G. An Adjustable Dummy Mass for Vibration-Transmissibility Testing of Cushioning Material: China, 201320302164.0[P].2013-10-16.
[26] 李毅, 温时宝, 于振, 等. 单层缓冲材料振动传递特性测试装置的设计与验证[J]. 实验力学, 2023, 38(5): 655-664.
LI Y, WEN S B, YU Z, et al.Design and Verification of Vibration Transmissibility Characteristics Testing Device for Single-Layer Cushioning Material[J]. Journal of Experimental Mechanics, 2023, 38(5): 655-664.
[27] 李毅, 温时宝, 张振秀, 等. 一种带导杆的活结螺杆式快速组合圆形质量系统: 中国, 202110986294.X[P].2024-01-30.
LI Y, WEN S B, ZHANG Z X, et al. A Rapid-Assembly Circular Dummy Mass System with a Knot-Type Screw and Guide Rod: China, 202110986294.X[P].2024-01-30.
[28] 温时宝, 周晓猛, 于振, 等. 一种哑铃式质量系统缓冲材料振动传递特性试验装置: 中国, 202310208318.8[P].2025-08-22.
WEN S B, ZHOU X M, YU Z, et al. A Dumbbell-Type Dummy Mass System for Testing the Vibration Transmissibility Characteristics of Cushioning Materials: China, 202310208318.8[P].2025-08-22.
[29] 中国国家标准化管理委员会. 包装运输包装件试验时各部位的标示方法: GB/T 4857.1—2019[S]. 北京: 中国标准出版社, 2019.
Standardization Administration of the People’s Republic of China. Packaging—Basic Tests for Transport Packages—Part 1: Identification of Parts When Testing: GB/T 4857.1-2019[S]. Beijing: Standards Press of China, 2019.
[30] 赵冬菁. 包装件性能非破坏性测试方法与性能调控研究[D]. 曲阜: 曲阜师范大学, 2020: 16-18, 30-31.
ZHAO D J. Research on Non-Destructive Testing Method and Performance Regulation of Packages[D]. Qufu: Qufu Normal University, 2020: 16-18, 30-31.
[31] ASTM International. Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Materials: ASTM D1596-14 (2023)[S]. West Conshohocken: ASTM International, 2023.
[32] 中国国家标准化管理委员会. 包装用缓冲材料动态压缩试验方法: GB/T 8167—2008[S]. 北京: 中国标准出版社, 2008.
Standardization Administration of the People’s Republic of China. Test Method for Dynamic Compression of Cushioning Materials for Packaging: GB/T 8167-2008[S]. Beijing: Standards Press of China, 2008.
[33] 杨帅, 康勇刚, 齐菲. 低温对聚乙烯发泡材料动态缓冲性能的影响[J]. 包装工程, 2015, 36(7): 21-25.
YANG S, KANG Y G, QI F.Effect of Low Temperature Upon Dynamic Cushioning Properties of EPE Foam Material[J]. Packaging Engineering, 2015, 36(7): 21-25.