目的 为解决市场上袋装货物装卸工作繁重、装卸自动化程度低，复杂的装卸环境影响工人的身心健康的问题，本文基于市场需要，设计一套可自动装卸袋装物料的装卸装备。方法 本文首先采用SOLIDWORKS软件对装卸装备进行三维模型的研发设计，并完成装置的虚拟装配，然后利用FLUENT软件对主要的受力部件进行静力学分析，最后采用响应面优化设计法对主要零件进行结构优化。结果 通过FLUENT软件分析，确定了装备的强度、刚度及稳定性满足工作的需要，同时经过响应面优化得到零部件的最优尺寸。根据优化前后各项数据可知，优化后的零部件质量比优化前质量减少了27.76%，最大等效应力减少了26.78%，最大变形量减少了59.66%。结论 该装卸装备可广泛应用在水泥行业、化肥行业和食品行业等应用袋装货物的场景，为下一台样机的生产提供理论依据。#$TAB

In order to solve the problems of heavy loading and unloading of bagged goods, low degree of loading and unloading automation and complex loading and unloading environment affecting workers' physical and mental health, the work aims to design a set of loading and unloading equipment that can automatically load and unload bagged materials based on market needs. SOLIDWORKS was used to develop and design the three-dimensional model of the loading and unloading equipment and complete the virtual assembly of the device, and then FLUENT was used to carry out static analysis of the main stressed parts, and finally the response surface optimization design method was used to optimize the structure of the main parts. Through the analysis by FLUENT, it was determined that the strength, stiffness and stability of the equipment met the needs of the work, and the optimal size of the parts was obtained through the response surface optimization. According to the data before and after optimization, the weight of parts after optimization was reduced by 27.76% compared with that before optimization. The maximum equivalent stress was reduced by 26.78% and the maximum deformation was reduced by 59.66%. The loading and unloading equipment can be widely used in the application of bagged goods in cement industry, fertilizer industry and food industry, which provides a theoretical basis for the production of the next prototype.