立方非线性隔振系统动力学特性与设计分析

姚绍雯

包装工程(技术栏目) ›› 2018 ›› Issue (19) : 87-90.

PDF(825 KB)
PDF(825 KB)
包装工程(技术栏目) ›› 2018 ›› Issue (19) : 87-90. DOI: 10.19554/j.cnki.1001-3563.2018.19.016

立方非线性隔振系统动力学特性与设计分析

  • 姚绍雯
作者信息 +

Dynamic Characteristics and Design Analysis of Cubic Nonlinear Vibration Isolation System

  • YAO Shao-wen
Author information +
文章历史 +

摘要

目的 研究非线性隔振系统的动力学行为。方法 以立方非线性系统为研究对象,研究了阻尼系数、无量纲参数R对放大倍数的影响规律,并进行了隔振设计。结果 随着阻尼系数和无量纲参数R的增大,放大倍数峰值减小。结论 系统的非线性行为有利于系统隔振性能,即便阻尼系数等于0的情况下,也不会出现放大倍数无穷大的情况;系统阻尼的增加,有利于改善隔振性能。

Abstract

The paper aims to study the dynamic behavior of the nonlinear vibration isolation system. Influences of damping coefficient and dimensionless parameter R on the magnification of the cubic nonlinear system were studied, and the isolation design was carried out. The magnification peak decreased with the increase of damping coefficient and dimensionless parameter R. The nonlinear behavior of the system was conducive to the isolation performance of the system. Even if the damping coefficient equals zero, there will be no infinite magnification; the increase of the system damping is conducive to the improvement of the isolation performance.

引用本文

导出引用
姚绍雯. 立方非线性隔振系统动力学特性与设计分析[J]. 包装工程(技术栏目). 2018(19): 87-90 https://doi.org/10.19554/j.cnki.1001-3563.2018.19.016
YAO Shao-wen. Dynamic Characteristics and Design Analysis of Cubic Nonlinear Vibration Isolation System[J]. Packaging Engineering. 2018(19): 87-90 https://doi.org/10.19554/j.cnki.1001-3563.2018.19.016

PDF(825 KB)

Accesses

Citation

Detail

段落导航
相关文章

/